3-D Flag Picture

I made this little, patriotic picture to put into our guest bedroom.  The flag pops out from the words in the background and it looks really nice after you put it all together.  This project took about 5 minutes to do and was so easy!  I found the free printable and instructions for this project HERE.  Be sure to print both pictures 5x10, they will come out right.  Also, I used Kodak glossy photo paper to make mine (be sure to set your printer setting to the glossy photo paper for best results).  All you need is a printer, printer paper (preferably glossy photo paper), a hot glue gun and a glue stick for it and a 5x10 frame (I bought mine at Walmart for about $2).  For the back of the flag, I just used a piece of leftover scrap paper from the cut outs, rolled it up into a thick square and put a dab of hot glue on it to hold it together.  I also hot glued the finished square to the back of the flag and the background words instead of using a glue stick, double-sided tape would probably work too. 

Here is the one I made